MOPED - Rotary multi-turn actuator with the electronic system

MOPED (52 030 - 52 036, 52 039)

Electric rotary multi-revolution actuators - IP 67

Configurator of actuators MOPED 10-60Nm 52039

Electronic outfit

Electro-mechanical control board is replaced with the electronic system DMS2 or DMS2 ED. Both systems scan position of the output shaft and torque of the electric actuator by contact-free magnetic sensors. The sensor of the output shaft position is absolute and does not require any backup power supply in case supply voltage is disconnected during operation of the electric actuator. Both systems can be set and monitored by a computer with controlling programme or manually without a computer.

The more simple system DMS2 ED substitutes electromechanical parts and/or provides for controlling the electric actuator by input analog signal as in the version Control.

The system DMS2 enables the electric actuator to be used for two-position and three-position regulation or to be connected to the industrial bus bar Profibus.

Technical data

MOPED

Type number

52030

52031

52032

52033

52034

52035

52036

52039

20-125

63-160

160-250

250-500

320-630

630-1200

1000-2500

10-60

Tripping force [kN]

Adjusting time [s/90°]

Position-changing velocity

[min-1]

7-80

7-145

16-100

16-63

45-100

20-40

9-40

[mm/min]

Working stroke

[°]

[ot]

2-2010

2-1420

2-1090

2-470

1,5-2880

[mm]

Supply voltage

1x 230 V, 50 Hz

✔

24 V, 50 Hz

1 x 110 V, 50 Hz

3 x 230 / 400 V, 50 Hz

✔

Control

Two position On-Off

✔

Three position

✔

Continuous

PROFIBUS

✔

Position sensing

Resistance transmitter (R)

Absolute

✔

Current transmitter (I)

Position interrupt

✔

Torque-initated interrupt

✔

Manual actuation

✔

Explosion-proof design

Type of enclosure

IP 67

Weight - depending on design (Al/cast iron) and on motor [kg]

27-28

41-54

45-54

90-97

97-99

206-211

304-309

Usage

The electric actuators MODACT ^® MOPED are designed for shifting valves and/or other elements for which they are suitable with their reversible rotary motion. Other using than that for controlling valves should be discussed with the manufacturer. The actuators can operate in circuits of remote control. The actuators can also operate in circuits of automatic regulation with the regime S4 – 25 %; 1200 h-1.