Edit
MOKED

Electro-mechanical control board is replaced with the electronic system DMS2 or DMS2 ED. Both systems scan position of the output shaft and torque of the electric actuator by contact-free magnetic sensors. The sensor of the output shaft position is absolute and does not require any backup power supply in case supply voltage is disconnected during operation of the electric actuator. Both systems can be set and monitored by a computer with controlling programme or manually without a computer. 

The more simple system DMS2 ED substitutes electromechanical parts and/or provides for controlling the electric actuator by input analog signal as in the version Control. 

The system DMS2 enables the electric actuator to be used for two-position and three-position regulation or to be connected to the industrial bus bar Profibus.


Technical data

MOKED
Type number 52325 52326 52327 52328 52329
Tripping torque [Nm] 16-80 63-125 125-250 250-500 500-1000
Tripping force [kN]          
Adjusting time [s/90°] 10-80 10-80 20-160 20-80 40-160
Position-changing velocity [min-1]          
[mm/min]          
Working stroke [°] 90 90 90 90 90
[ot]          
[mm]          
Supply voltage 1x 230 V, 50 Hz
24 V, 50 Hz          
1 x 110 V, 50 Hz          
3 x 230 / 400 V, 50 Hz
Control Two position On-Off
Three position
Continuous          
PROFIBUS
Position sensing Resistance transmitter (R)          
Absolute
Current transmitter (I)          
Position interrupt
Torque-initated interrupt
Manual actuation
Explosion-proof design          
Type of enclosure IP 65, 67 IP 65, 67 IP 65, 67 IP 65, 67 IP 65, 67
Weight - depending on design (Al/cast iron) and on motor [kg] 7,5 13 13-21 26-27 43-45

Usage

The actuators MODACT ® MOKED are designed for shifting control elements by a reversible rotary motion with the turning angle of the output part 90°, including cases when tight closure in end positions is required. Typical example of using is control of ball and flap valves in similar installations in the regime of remote control as well as automatic regulation. The electric actuators MODACT ® MOKED are mounted directly on the controlled element.


Files for download:

3D model 52325zip3.92 MB
3D model 52326zip3.53 MB
3D model 52328zip3.81 MB
3D model 52327zip3.96 MB
3D model 52329zip4.12 MB
Cataloguepdf1.83 MB
Profibus DP pdf847.84 KB
ANCHOR_TOP_TITLE